RI Title
RI logo


The tester "Name" is used to load the configuration in a Simulator and appears as Node name in the STDF file. The system can be renamed from the Tester's Configuration window. This must be completed on the actual system, not a virtual workstation. This procedure requires "Dec 2013 Misc Updates" RiPatch GF10RC1A.212, SubVersion=18. If you don't have this patch included with the active Short Cut, follow the steps below to "To Change Tester Name Without Patch 212.18"



To Change Tester Name:
  1. Choose Log On from Guru with user with Developer role and select the latest entry from the Short Cut button to launch the main Cassini window.
  2. Choose System > Tester button to open the configuration window. (See Figure 1)
  3. From the Configuration window, choose Tester > Change Tester Name... menu, enter a new name and press OK. Pressing OK with the same name or Cancel will not change anything.
  4. From the Cassini application window, choose Options > Save State to set the currently loaded tester as "default" so it is loaded automatically when Cassini is started from a Short Cut.
  5. Close all windows by pressing the X in the top right corner of each window.

Figure 1: Cassini Open Tester Configuration Window


Figure 2: Tester > Change Tester Name




Hide details for To Change Tester Name Without Patch 212.18:To Change Tester Name Without Patch 212.18:
To Change Tester Name Without Patch 212.18:
    1. Choose Log On from Guru with user with Developer role and select the latest entry from the Short Cut button to launch the main Cassini window.
    2. Choose System > Tester button to open the configuration window. (See Figure 1)
    3. Choose Tester > Save As..., enter a new name for the tester and press OK. (See Figure 3)
    4. Next, launch Guru Browser from the Apps button to obsolete the ri.sys.ObjClass="RiTesterDef" and ri.Sys.Title="<<OLD NAME>>" so that virtual workstations will not choose the old version by mistake.
    5. From the Cassini application window, choose Options > Save State to set the currently loaded tester as "default" so it is loaded automatically when Cassini is started from a Short Cut.
    6. Close all windows by pressing the X in the top right corner of each window.

Figure 3: Tester SaveAs... (Without Patch



PrintEmail Link
https://roos.com/docs/RBEH-9CY5CF
ROOS INSTRUMENTS CONFIDENTIAL AND PROPRIETARY
©2013-2024 Roos Instruments, Inc. All rights reserved.