This document identifies the user interface for Cassini's Testplan Editor. Open a Testplan from the Test > Plans menu or Test Object Browser's RiTestplan object's Activate menu. Cassini version is from Short Cuts > Training. User uses left, right and CTL+left clicks to interact with UI. Users types values into prompts and some keyboard shortcuts are implemented (cut CTL+X, paste CTL+V).
Cassini Testplan Editor
Testplans are stored as .CFF in Guru. Cassini provides a graphical testplan editor that reads the .CFF and uses it to display the contents of a Testplan. There are three panes; Navigator, Action and Test and Menu actions across the top. Developers can copy/paste buttons from other Testplans and the Tester's Editor window, opened with Tester > View.
Test Plan Settings > Global Defailts, Disconnect Settings, Connect Sequence
Test Section $$$$$ > Conditional Statement, Section Defaults,Test: $$$$ ... (Test State) Test: $$$$$ ....
Right click is Edit menu.
Compile (Grey, Green, Red), Run (Green), Repeat (Prompt), Retest (keeps same device ID)
Displays Test Panel selected in Navigator Pane (vector, scaled)
Timestamp (last modification)
"Note" displayed if a panel has note paragraph, click to show note
Right click Test Pane:
Sample button for right click menu
right click center of test button (inside "Averages")
Right Click > Group Selected
right click outside button (inside "System")
Open Multisite - Multisite editor UI
Show History - prompts testplan revisions, opens testplan
Compare History - prompts testplan revisions, visual compare diff
Diff History - prompts testplan revisions, colorized ascii compare diff
Diff Any - prompts all testplans, colorized ascii compare diff (effective only with similar testplans)
Edit Description - Prompt modify text :Description CFF
show graphic - displays java viewer for added graphic
add graphic - stores graphic in guru
Set STDF Lot Info - stores STDF header info for worksheet/datalog
Save Over... - replaces latest version of a testplan with a different Title. (opposite of fork/save as)
Save Simulation - embeds active test objects and populates manifest. (to be used to "activate" in VM)
Save Guru - Prompt user save fields
Save Cal Test > Dib, Fixture, Instrument (changes testplan ri.sys.Type to organize by ri.test.Dib, ri.test.Fixture, or ri.sys.Model)
Add Test Section
Add Test State
Don't Inherit Defaults
Disable/Enable > Selected, Disable All, Enalbe All, DoIfTrue refresh
Optimize > Test Plan > On, Off; Test Section > On, Off
View - Open Configuration Library of Buttons
Change dut... - Prompt list of RiDevice, activate Device instrument in config
Change Pins... - Prompt list of RiDevicePins, activate in Device instrument (shows only related to Dut unless Show All is selected)
Change dut control... - Prompt list of RiDutControl , activate in Device instrument (shows only related to Dut unless Show All is selected)
Change dib...- Prompt list of RiDutInterface, activate in DutInterface instrument (shows only related to Dut unless Show All is selected)
Change Fixture... - Prompt list of RiFixture, activate in DutInterface instrument
Load Sim - activates all objects embedded (see File > Save Simulation)
None - unloads current limits
New - creates new limit table name (UL, LL pairs)
Select... - prompt for current limit table names
Copy... - duplicates current limits, new name
Delete... - removes limits
Table - Shows table of all limits
Display Compiled Settings
Display Delta Settings
Display Panel Test States
List all Notes
Change data names
Changes save names
Change LV names
Load Symbol Table
Remove Symbol Table
Edit Symbol Table
Save Symbol Table
Do If True Invert
Auto Inc ID
Abort on Fail
Worksheet > Details, Statistics, Clear Statistics
Inspect > ....
Load Bias Offsets
Clear Bias Offsets
Display Data Tags
Tester Editor Window
Displays the library of buttons available for the Instruments active in the current Tester configuration. The current Tester Title (RiTesterDef) is displayed in the window title. The Tester Editor window has 4 panes; Instrument (top left), Resource (top middle), Help (top right), Resource Buttons (lower).
Users can left click to change the buttons value, CTL+Left click to activate (copy to clipboard). Multiple active buttons will be grouped by owner when pasted into a Testplan | Test panel.
Instrument pane lists all instruments alphabetically. Choose an instrument to display the relevant Resources in the middle pane.
Resource pane lists the different categories of buttons supported by that Instrument.
Resource Buttons pane displays the default idle state of all test state and calc buttons.
Help pane displays the currently selected button's help.
Right click menu: Select, Show Help
Right click menu on pane: Uncopy all, Copy all, Note, Inspect