RI Title
RI logo


If planning an EPC exchange, it may be useful to backup the local guru and apps so the replacement EPC can be setup with all the correct settings. Without a Guru Server, an EPC exchange requires that the D:/RiApps and D:/RiGuru directories are transferred.



Perform the steps below before removing the original EPC. ONLY If the EPC won't boot, the drive would have to be exchanged in a functioning EPC and then these steps must be followed. Do not move the drive to a new EPC because it contains unique calibration data for the RIFL master and may cause the tester startup process to fail. Please contact [email protected] for specific instructions for migrating that information.

To Transfer EPC Guru and Applications Directories:
  1. Backup currently running EPC: (choose A or B)
    1. For standard EPC (ArcaOS), open a command window and enter the following commands to archive the RiGuru and RiApps directories creating a .zip file. (-r is required to recurse into directories, -s splits into 2G files, -9 is max compression). Always press [enter] key at the end of each command.
      d:
      zip -r -s 2000m -9 BackupYYYYMMDD RiGuru RiApps
    2. For secure EPC (Win10), select the RiApps and RiGuru directores from the home path (%HOMEPATH% or C:\Users\<Username>) and choose Send To > Compressed (zipped) folder from the right mouse button menu.)
  2. Attach a compatible USB drive and copy the archive. If a shared network drive is mounted, change "e:" to be the drive letter of the intended destination.
    copy Backup*.zip e:
  3. Once the file copy command completes, eject the USB drive with the USB Eject icon in the lower right corner. (See Figure 1)
  4. Proceed to Shut Down the OS and swap EPCs. Startup the replacement EPC and attach the USB Drive.
  5. Restore to new EPC:
    1. For standard EPC (ArcaOS), open a command window from the OS taskbar and type:
      d: [enter]
      unzip -o e:\BackupYYYMMDD.zip
    2. For secure EPC (Win10), right click on the .ZIP file and choose Extract All, choose Browse, then type %HOMEPATH% in the top of the Select a destination prompt and press ENTER. The destination will change to "C:\Users\<Username>" and choose Select Folder. Then press Extract.
  6. Choose System > Shutdown to restart Guru
  7. Proceed with the other steps on the Exchange System Controller EPC TIM Checklist https://roos.com/docs/RBEH-APL2LM

Figure 1: Eject F: Drive


This process requires a compatible USB drive or shared network drive. See these related app notes for details.
- Prepare USB Drive for Cassini EPC and Virtual Workstation (FAT + 2 GB max partition) https://roos.com/docs/RBEH-AXWT54
- Sharing Network Folders https://roos.com/docs/RBEH-7LD4MU

PrintEmail Link
https://roos.com/docs/RBEH-BTRH3N
ROOS INSTRUMENTS CONFIDENTIAL AND PROPRIETARY
©2020-2024 Roos Instruments, Inc. All rights reserved.