![]() ![]() REUSE THIS BOX |
Note: The Infrastructure TIMs (Source) must be shipped using "Packaging Instructions for 20 GHz Synthesizers" (https://roos.com/docs/RBEH-4MDP9R) because they are so heavy.
TIM Packaging
- Open box so TIM "head" (notch) is facing to the left. Two screws should be visible from the TOP. Make sure foam padding is below and around TIM.
- Place foam padding on TOP of TIM and close box
Your Own Packaging
Use a box of at least 26 in x 20 in x 8 in (66 cm x 51 cm x 20 cm) outside dimensions.
Securely pack with at least 3 inches ( 7 cm ) of compressible polyethylene foam packing or bubble wrap around all surfaces of the TIM.
Additional packing instructions can be found on-line. UPS: How to Ship a Package
You can contact [email protected] if you have any questions. You may reorder original packing materials directly from Roos Instruments.