Calibration Kit, 40GHz Base Kit
Calibration base kit for +40GHz systems
Part Number: RIK0382A
In Stock:
Estimated Restocking Time: 4-6 weeks
The Calibration Kit (Cal Kit) is used while calibrating an RI test system to frequencies of 40 GHz or less. It includes a Digital Multimeter, Power Meter and Sensor, S Parameter Standards, Cables, RF Adapters, RF Attenuators.
A Cassini Cal Kit consists of the Cal Standards RIK0098A. The diagnostic interface kit is sold separately and required for Calibration that includes a Diag/Cal Kit and configuration specific cables, attenuators, and adapters.
The Calibration kit needs to be calibrated annually to NIST standards. RI offers Cal Kit service as RIK0245A 40 GHz Cal Kit Service.
RI usually only issues a NIST traceable calibration certificate only when a preventive maintenance and calibration (PMC) is performed. A calibration is performed when a SyRF Core instrument is repaired or replaced, but a certificate is not issued.
 | RIK | Description |
 | 023A | RI7100A Calibration Kit |
| 130A | Cassini 8-Slot Interface Kit |
| 149A | Calibration Standards Kit, Cassini 18 GHz |
| 150A | Calibration Standards Kit, Cassini 40 GHz |
| 151A | Cassini 16-Slot Interface Kit |
Each RI Cal Kit requires annual calibrations for most instruments. If available, you can use a calibration lab at your facility or one in your local area. If not, some of the components may have to be sent to the manufacturer for calibration. Below is a listing of the Cal Kit components, Vendor Addresses and Web Sites.
Cal Kit Vendor Information: Please refer to the original manufacture's website for a vendor representative in your area.
| Power Meter & Sensor Gigatronics Inc. 4650 Norris Canyon Rd. San Ramon, CA 94583-1320 USA http://www.gigatronics.com/ | DMM Fluke Corporation 6920 Seaway Blvd. Everett, WA 98203 USA http://www.fluke.com/ | S Parameters Anritsu Company 490 Jarvis Dr. Morgan Hill, CA 95037-2809 USA http://www.anritsu.com/ |
Detailed Item List: (note: Labels subject to change without notice)
RI PartNumber | # | Description | Comments |
n/a | 1 | Cal Certs for all instruments | Deliver to your Cal Lab, note, next cal date based on when the item was pulled from inventory, not what is on the sticker. |
ANBM8N5A | 1 | Cal Kit Maintenance Instructions (DocID RBEH-8K93EC) | Instructions for Maintenance |
ELTH8M1A | 1 | Power Sensor 40GHz, 2.9mm, Gigatronics 80324A w/Cert | 1 Yr Cycle |
G90H7K2A | 1 | Adapter, SMA(f)-N(m), 18 GHz | Power Meter to Sensor with SMA |
G9AKWA2A | 1 | Adapter, 2.9mm(f)-2.9mm(f) K Conn | RF Power Cal, Always CLEAN and tighten nut, DO NOT ROTATE adapter |
GGFEGW2B | 1 | Cable, RIFL3-RIFL2, 84in | Power Meter control |
GM73Y02A | 1 | Adapter, SMA(m)-SMA(f), 20 GHz | RF Power Cal, Always CLEAN and tighten nut, DO NOT ROTATE adapter |
M5PJG21A | 1 | Cable, Conformable, SMA(m)-SMA(m) 11" | Use caution when bending cable to fit, no sharp kinks |
M5WNBC1A | 1 | Cable, BNC(m)-BNC(m) 36in | WF DC Cal via tester's FIX block |
M6LPX11B | 4 | Vial W/Cap, 20ml | Storing Adapters |
M7CJ222A | 1 | Spanawave Power meter 8541C W/Cert | 1 Yr Cycle |
MBH0VH1B | 4 | Adapter, #12 PKZ-SMA(f) Custom, Cal/Diag | <=40 GHz RF Cal, any RF TIM Blocks in Diag/Cal Plate |
MFN6ZK1B | 1 | Multimeter Fluke 87v Series 5, w/Cert | 1 Yr Cycle |
MFT08S1A | 1 | AC Line Cord IEC C13(f)-C14(m), 6ft | Power Meter DC |
MJHEHY3A | 1 | GPIB Cable 0.5m M-M/F (90 degrees) | Power Meter control |
MM9NAK6F | 1 | Case, Transit, Cassini Cal Kit | Protects all Cal instruments |
MMB7GT5A | 1 | Banana to ez-hook mini gripper leads, 24" 1 red 1 black (set) | DC Calibrations, DMM |
MMF72X1A | 1 | Adapter, BNC(f) to SMA(m) | WF Cal, Always CLEAN and tighten nut, DO NOT ROTATE adapter |
MMFPB91A | 1 | Adapter, BNC(f) to Dual Banana Plug | WF Cal |
MNXEHK4A | 1 | Cable, Gigatronics Power Sensor-N(m) | 1 Yr Cycle |
RI8502B0 | 1 | RI8502B RIFL-GPIB POD Isolated | Power Meter RIFL Control Cassini AUX H-Port |
.jpg!OpenElement)
.jpg!OpenElement)
.JPG!OpenElement)
.JPG!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)