Includes calibration of the entire RI Calibration Kit, including the 40 GHz Noise Source and K-Connector type Open/Short/Load Standards. Does not include repair/replacement charges (if any) or shipping charges.
Roos Instruments recommended calibration of the Cal Kits is required every 2 years. However, the Power Meter, Power Sensor and DMM can be (optionally) done with a 1 year calibration cycle.
To issue calibration documentation, cal data for ALL components of the kit need to be be provided to RI.
Typical Turn-around Times, per component: (This is after the components are received at RI)
Item Name | Vendor | Model Number | Turn Time |
DMM | Fluke | 87 IV | 2 weeks |
Power Meter | Spanawave / Gigatronics | 8541C | 2 weeks |
Power Sensor - 40GHz | Spanawave / Gigatronics | 80324A | 4 weeks |
40 GHz OSL | Anritsu | 28K50-2 | 2 weeks |
Noise SRC 40GHz | Micronetics | NS346KA-CS3 | 5 weeks |
Item | Ref | Part Number | QTY | Description | Category | Qty in Stock |
---|---|---|---|---|---|---|
1 | G7E3A62A | 1 | Noise Source calibration - NC4563 | Mntnnc | ||
2 | G7E3AA2A | 1 | 2yr Cal Cycle for Z540 calibration services, SC5224 Cal Kit (20GHz) | Mntnnc | ||
3 | G8CV1N2A | 1 | Calibration Services for Power Meter & Sensor | Mntnnc | ||
4 | G8CV222A | 1 | Calibration Services for Digital Volt Meter DMM | Mntnnc |