RI Title
RI logo

Conductive Elastomer round .071 Dia, 1"

Fixture DUT Clamp

Part Number: MA662W1A

Estimated Restocking Time: 4-6 weeks

0.071 inch diameter conductive elastomer fits in the grove designed to provide EM shielding between the DIB and the Fixture via the Pedestal Support and DUT Clamp.

Minimum order of 12" required. (305 mm)

Cut the elastomer at the populated launches/inserts to prevent traces from shorting.

Note: The elastomer will tarnish and discolor when exposed to air. Tarnish improves conductivity and can be easily mis-identified as damage.


Included in the following RIKs.
Part #Description
Product Catalog
RIK0090AFixture, Pedestal Support 20RF (Seico Epson)
Product Catalog
RIK0093AFixture Small 12 Coax DUT Clamps, Single Site
Product Catalog
RIK0094AFixture Large 30 Coax DUT Clamps, Dual Site
Product Catalog
RIK0119AMatrix Fixture, Dual DUT Clamp & Support Kit
Product Catalog
RIK0123AMatrix Fixture, Single DUT Clamp & Support Kit
Product Catalog
RIK0129AFixture DUT Clamp Kit, 20RF Fixture Seiko Epson
Product Catalog
RIK0152AFixture Top Plate, Matrix Quad, Intest Compatible
Product Catalog
RIK0152BMatrix Fixture, Quad Top Plate, Pedestal Support & Clamp
Product Catalog
RIK0213AQuickLock, DUT Clamp, Seiko/Epson
Product Catalog
RIK0215AQuickLock, Pedestal Support
Product Catalog
RIK0239AQuickLock, Pedestal Support, Pin Aligned
Product Catalog
RIK0240AQuickLock, DUT Clamp, Rasco Quad
Product Catalog
RIK0241AQuickLock, Pedestal Support, Rasco Quad
Product Catalog
RIK0259AQuickLock, DUT Clamp, Seiko/Epson, 8 screw
Product Catalog
RIK0260AQuickLock, Dual DUT Support, Seiko/Epson, 4 screw
Product Catalog
RIK0260BQuickLock, Dual DUT Support, Seiko/Epson
Product Catalog
RIK0262AQuickLock, 2 piece 2 Site DUT Clamp, Seiko/Epson
Product Catalog
RIK0278AMatrix Fixture, Quad Pedestal Support
Product Catalog
RIK0279AMatrix Fixture, Quad DIB Clamp


OEM Part Number: Vanguard 2155-03-D50-ORA-NPS-SPL

Related Documents:

User account required Create new account  
Product Docs
DIB Design Guide - DUT Interface Board, Device Interfacehttp://roos.com/docs/RBEH-8STVCB?Open

Insert the elastomer into the groves in the DUT Clamp and Pedestal Support, on both sides of the DIB. Cut the elastomer at the populated launches/inserts to prevent traces from shorting.