Provides up to four 6 GHz absorptive SP4T Switches.

The includes two DUAL SP4T 5MHz to 6 GHz RF module. It is especially easy to use since DC wiring is not required (do not use cbits to control DS1-DS4). It also helps to reduce fixture complexity where a high level of RF switching is required.

Related Documents:

See Device Connection Editor - Fixture https://roos.com/docs/ECHN-8EGCAK

Add the following line using Device Connection Editor > Fixture Path > Switch field.

This POD Includes two module boards. Each board has two RF switches. There are a total of 4 switches.

Programming Example:

A4S2J5=J1

A = Fixed value "A"
4 = Pod Slot Module #, (example is in Pod Slot #4)
S = Fixed value "S"
2 = Switch number (1,2,3,4)
"J5=J1" = switch label, J#=J$ (#=2,3,4,5 with "=J1" OR # = 7,8,9,10 with "=J6")

Note: Use labels on PCB, the drawing below may be out of date.





Pin Out:

# = Pod Location

Module #	Pin#	Function	Switch Program	Connector Type
1,2	P2:12	+5V		Header Pin
1,2	P2:11	-5V		Header Pin
1,2	P1:5	+5V
1	J1	SW1 Common		SSMP Male
1	J2	SW1 NO	A#S1J2=J1	SSMP Male
1	J3	SW1 NO	A#S1J3=J1	SSMP Male
1	J4	SW1 NO	A#S1J4=J1	SSMP Male
1	J5	SW1 NO	A#S1J5=J1	SSMP Male
1	J6	SW2 Common		SSMP Male
1	J7	SW2 NC	A#S2J2=J6	SSMP Male
1	J8	SW2 NO	A#S2J3=J6	SSMP Male
1	J9	SW2 NO	A#S2J4=J6	SSMP Male
1	J10	SW2 NO	A#S2J5=J6	SSMP Male
2	J1	SW3 Common		SSMP Male
2	J2	SW1 NO	A#S3J2=J1	SSMP Male
2	J3	SW1 NO	A#S3J3=J1	SSMP Male
2	J4	SW1 NO	A#S3J4=J1	SSMP Male
2	J5	SW1 NO	A#S3J5=J1	SSMP Male
2	J6	SW4 Common		SSMP Male
2	J7	SW2 NC	A#S4J2=J6	SSMP Male
2	J8	SW2 NO	A#S4J3=J6	SSMP Male
2	J9	SW2 NO	A#S4J4=J6	SSMP Male
2	J10	SW2 NO	A#S4J5=J6	SSMP Male