Connects 4 RF Cables to the DIB using the Open Fixture Engage Plate. 300mm, 11.8 inch cable. 2.9mm SMA Connector to Bulls Eye (planned PKZ#12 up to 40 GHz)
The max frequency is dependant on the PCB micro strip launch trace design and the SMA connector type (standard up to 18 GHz, PKZ#12 and 2.9mm is good up to 40 GHz). However, since the PCB pad design severly limits the max frequency range, standard SMA connectors and 18 GHz max frequency is recommended.
PKZ to SMA(m) cables for most purposes, including Waveguide and RF signals below 18 GHz.
|Part #||Description||Applications||Gender||90°||QTY||Length (in.)||Flexability||Max Freq. (GHz)|
|RIK0258A||RF Cable, Flex, PKZ #12(f)-SMA(m), 12"||(Flexible) RF TIM Blocks to DIB Launch RF Inserts||PKZ #12(F)-SMA(M)||1||12||Flex||20|
Suitable for signals from the following TIMs:
|RI8508C||Source - 6 GHz Microwave Signal Generator TIM|
|RI8567B||Test Set and RF Measure - 2 Port, 6/12 GHz TIM|
|RI8575A||Phase Noise Measure, 16 GHz TIM|
|RI8577A||20 GHz Combiner with Amp/Attenuator TIM|
|RI8586A||Source - 25 GHz Microwave Signal Generator TIM*|
|RI8594B||Time Domain Meas. (Waveform + LNC) TIM|
|RI8595B||Power Amplifier, 0.7-6 GHz, 20W Max TIM|
|RI8596A||RF Measure - 24 GHz DSP Receiver w/ LO TIM*|
|RI8603A||Power Amplifier, Generic TIM|
Note: Subject to change.