Driver Board, Ribbon Cable, 20" (Qty 1)
Extends Mounting Options from Driver to Switching/Atten Modules
Part Number: RIK0256A
In Stock: 0
Estimated Restocking Time: 1-2 weeks
Extend mounting options to anywhere in the Fixture with this 20" Ribbon Cable for connecting Driver board (RIK0255A) with one Switch or Attenuator. Requires one cable per module.
NOTE: Ribbon cables are already included with the Bottom Plate (3x) or Carrier Mount (2x) hardware.
 | | Part # | Description |
 | | RIK0251A | Bottom Plate Mount, 20 GHz Pin Switch or Attenuator |
| | RIK0252A | Carrier Mount, 20 GHz Pin Switch or Attenuator |
Use with these RIKs.
| | RIK | Description |
| | 254A | Attenuator, Fixture 20 GHz 31dB in 1dB steps |
| | 250A | Hi IP3 SP4T Pin Switch 20 GHz, Absorptive |
| | 253A | Hi IP3 SP4T Pin Switch 20 GHz, Reflective |
| Item | Ref | Part Number | QTY | Description | Category | Qty in Stock |
|---|---|---|---|---|---|---|
| 1 | MRP5PA4A | 1 | Cable Assy Ribbon 10c 20in .050 | Rbbn |
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)
.png!OpenElement)
.jpg!OpenElement)
.jpg!OpenElement)