Switch Module, Dual 6 GHz High TOIP SP4T

6 GHz Fixture Switching High TOIP SP4T High Linearity Switch - TO BE USED WITH RIK0200A CARRIERS OR HIGHER (3.3V Digital output).

Part Number: RIK0218A

In Stock: 0

Estimated Restocking Time: 1-2 weeks

Send a Link

Description
Bill of Materials

Absorptive SP4T 6GHz switch. Use to switch RF signals up to 6 GHz through the Fixture.

Use with Cassini RIFL Carriers. (RIK0200A 13 Modules or RIK0236A 5 Modules)

Related Documents:

Install the module into any open carrier location. Note,

Use the Device Connection Editor to add the control to the "Switch" field of a Fixture Path Definition.

When writing to a Smart Carrier module control line the format is of S#10X1
S = "S" for switch
# = Module number being written to (1 - C) in HEX (so module location 9 = A)
X = 1, X, or 0.
Bit position = S# DS1 DS2 DS3 DS4
Ex. The string S6XX01 would drive DS3 low ( 0.0V ) and DS4 high (3.8V) on the fixture module placed at the physical location of M6 on the smart carrier.

Pin Out / Truth Table:

Pin#	Function	DS1	DS2	DS3	DS4	Connector Type	Example Module 5
J5	SW Common					MCX F
J6	SW1 NO	1	0	X	X	MCX F	S510XX
J12	SW1 NO	1	1	X	X	MCX F	S511XX
J4	SW1 NO	0	1	X	X	MCX F	S501XX
J11	SW1 NO	0	0	X	X	MCX F	S500XX
J3	SW Common					MCX F
J1	SW2 NC	X	X	1	0	MCX F	S5XX10
J10	SW2 NO	X	X	1	1	MCX F	S5XX11
J2	SW2 NO	X	X	0	1	MCX F	S5XX01
J9	SW2 NO	X	X	0	0	MCX F	S5XX00