The items in the RI Cal Kit require regular calibration either every 12 or 24 months. This can be done by any calibration lab at your facility or one in your local area or they can be sent to the manufacturer for calibration. RI can also perform this service by sending it to our scheduled Cal Lab (RIK0082A, RIK0245A). Below is a listing of the Cal Kit components, Vendor Addresses and Web Sites. IMPORTANT: Remember to 
update the Cal Kit definition.
Cal Kit Vendor Information: Please refer to the website for a vendor representative in your area.
| Power Meter & Sensor Gigatronics Inc. 4650 Norris Canyon Rd. San Ramon, CA 94583-1320 USA http://www.gigatronics.com/ | DMM Fluke Corporation 6920 Seaway Blvd. Everett, WA 98203 USA http://www.fluke.com/ | S Parameters Anritsu Company 490 Jarvis Dr. Morgan Hill, CA 95037-2809 USA http://www.anritsu.com/ | Noise Source NoiseCom E. 64 Midland Ave. Paramus, NJ 07652 USA http://www.NoiseCom.com/ |
Calibration Kit Items
Fill in appropriate values for these entries each time the the RI Cal Kit is calibrated. Keep a copy of this form with the Cal Kit.
Cal Kit Serial #_________________
 | Model Number | Serial Number | Cal Date | Next Cal Due |
DC Standard: | | | | |
RF Power Meter: | | | | |
RF Power Sensor: | | | | |
Noise Source: | | | | |
OSL Box ID: | | | | |
S Parameter Open: | | | | |
S Parameter Short: | | | | |
S Parameter Load: | | | | |